To rate this driver, go to the driver download page on the Instrument Driver Network.
Instrument Driver Technology:
LabVIEW Plug and Play (project-style)
Manufacturer:
GWInstek
Supported Language(s):
LabVIEW 2009
Supported Model(s):
GW Instek PEL-5000C Series; PEL-5006C, PEL-5008C, PEL-5010C, PEL-5012C, PEL-5015C, PEL-5018C, PEL-5020C, PEL-5024C,
Model(s) Tested:
GW Instek PEL-5006C
Interface(s):
GPIB, USB, Ethernet, RS-232
Firmware Revision Tested:
Certified:
No
NI Supported:
Yes
Source Code Available:
Yes
Driver Revision:
1.0.0
Original Release Date:
12/15/2020
Current Revision Date:
Some software components need to be installed before using this instrument driver. The minimum versions of these components are listed below, and can be downloaded from the Download Site.
· VISA 5.0 or later
· LabVIEW 2009 or later
For LabVIEW 8.2 and LabVIEW 2009 Refer to the LabVIEW Help for more information about software requirements. You access the LabVIEW Help by selecting Help»Search the LabVIEW Help.
For LabVIEW 2010 or later Refer to the LabVIEW Help for more information about software requirements. You access the LabVIEW Help by selecting Help»LabVIEW Help.