V1.02
◎ Fixed the problem that the Thermeter would not auto range.
◎ Fixed the problem that the Menu key will be locked after manually loading Parameter.
◎ Fixed the problem that the display digits of View List&Statistics would jump during scanning.
◎ Fixed the problem problem that the Channel List Setup would display the wrong channel.
◎ Fixed the problem problem that the channel parameters may be overwritten when switching View & Monitor & Channel after Auto Gain is turned on.
◎ Fixed the problem that the AutoGain & Manual Gain correction would be inaccurate for the first time.
◎ Added 2W OHM & RTD 2W & Therm 2W will deduct the value in advance.
◎ Fixed the problem that when Monitor is turned on during scanning and Slot is not the first card, the switch is not turned off normally.
◎ Optimize scanning speed (must cooperate with Card FW V1.01).
◎ Modify the TCO of HV_HA Card to not support SIM Auto.
◎ Modify Computer Channel A & B to set Channels above 401.
◎ Modify the maximum value displayed by STRAIN to +-9999.999.
